52CC/71CC Petrol Earth Auger Post Hole Borer Ground Drill+3 Bits + Extension Bar

52CC/71CC Petrol Earth Auger Post Hole Borer Ground Drill+3 Bits + Extension Bar. Material: Alloy Steel, Aluminum Alloy, Metal, Plastic, Rubber. Mode Of Operation: One Person Or Two People. Mixing Ratio: The Ratio Of 93# Gasoline To Two-Stroke Engine Oil Is 25:1. Output Shaft Diameter: 20mm/0.79in.

Applicable Brill Size: 10cm/4in, 15cm/6in, 20cm/8in. Fuel Tank Volume: 1000ml/33.82 Oz. Product Size: 503030 cm /19.6911.8111.81 in.

Package Size: 463733cm/ 18.1114.5712.99in. 3x Drill Bits: 4", 6" and 8. Please close the damper before starting the cold machine, and open the damper during normal operation.

Before leaving the factory, we added butter to the gearbox. After working for a period of time, please add butter appropriately according to your use frequency. When you are starting, please start quickly. Don't stop when pulling the rope, pull it slowly.

Before starting, press the oil bubble several times and check whether there is oil in the oil pipe. When the cold machine starts, please close the baffle first, and then open the baffle for normal operation. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Please Keep the Choke to on Position When the Machine Is in Use! The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. This Is a 2-Stroke Gas Powered Auger for Quickly Drilling into the Earth in Order to Set into the Ground: Fence Posts, Poles, Trees, Shrubs Etc.

If You Are Engaged in Related Professional Work, You Must Not Miss This Safe, Efficient and Convenient Professional Tool! Equipped with a 52cc Gasoline Engine, the Auger Can Be Handled by One or Two People Easily for a Wide Variety of Tasks. Ergonomically Designed, It Has Double Handles.

Double Handles Can Help You Operate the Machine More Stably. Two Handles Are Convenient for One-person Operation or Two-person Operation. Three Different Sizes of Drill Bits Help You Work Professionally. Drill Bits of Different Specifications Are Suitable for Using in the Different Environments, and Installation and Disassembly Are Also Very Convenient.

The Earth Auger Has a Straight Through Gearbox, Unlike Models with a Side Mounted Engine, the Straight Through Design Is Much More Robust and less Likely to Shear Gears. Engine: Single Cylinder, 2-Stroke, Air-cooled. Drill Bits : 4", 6" and 8.

Easy Starting System (Cord Starter). Change Bits Quickly and Easily. 3drill Bits: 4", 6" and 8. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received.

Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.

Accurate, easy to use and economical.

---